اعلان

  • اخر الأخبار

    اسكرب دمج خطين بريدج

    دة افضل اسكرب دمج خطين بريدج
    فقط كوبى وبسط
    مع تغير الايبى الخروج بدلا من الموجود فى الاسكرب


    دمج خطين برود باند
    /interface ethernet
    set 0 name=Local
    set 1 name=WAN1
    set 2 name=WAN2

    ////////////////////////////////////////////////////////////////////
    /interface pppoe-client

    add ac-name="" add-default-route=no allow=pap,chap,mschap1,mschap2 dial-on-demand=no disabled=yes interface=WAN1 max-mru=1480 max-mtu=1480 mrru=disabled name=pppoe-out1 password=hahaha \
    profile=default service-name="" use-peer-dns=no user=user-1
    add ac-name="" add-default-route=no allow=pap,chap,mschap1,mschap2 dial-on-demand=no disabled=yes interface=WAN2 max-mru=1480 max-mtu=1480 mrru=disabled name=pppoe-out2 password=hahaha \
    profile=default service-name="" use-peer-dns=no user=user-2

    /////////////////////////////////////////////////
    /ip firewall mangle

    add action=accept chain=prerouting disabled=no in-interface=pppoe-out1
    add action=accept chain=prerouting disabled=no in-interface=pppoe-out2

    add action=mark-connection chain=prerouting disabled=no dst-address-type=!local new-connection-mark=wan1_conn passthrough=yes per-connection-classifier=both-addresses-and-ports:2/0 src-address=172.16.0.0/16
    add action=mark-connection chain=prerouting disabled=no dst-address-type=!local new-connection-mark=wan2_conn passthrough=yes per-connection-classifier=both-addresses-and-ports:2/1 src-address=172.16.0.0/16

    add action=mark-routing chain=prerouting connection-mark=wan1_conn disabled=no new-routing-mark=to_wan1 passthrough=yes src-address=172.16.0.0/16
    add action=mark-routing chain=prerouting connection-mark=wan2_conn disabled=no new-routing-mark=to_wan2 passthrough=yes src-address=172.16.0.0/16
     /////////////////////////////////////////////////////
    /ip firewall nat
    add action=masquerade chain=srcnat disabled=no out-interface=pppoe-out1 src-address=172.16.0.0/16
    add action=masquerade chain=srcnat disabled=no out-interface=pppoe-out2 src-address=172.16.0.0/16

    ////////////////////////////////////////////////////////////////////
    /ip route
    add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=pppoe-out1 routing-mark=to_wan1 scope=30 target-scope=10
    add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=pppoe-out2 routing-mark=to_wan2 scope=30 target-scope=10
    add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=pppoe-out1 scope=30 target-scope=10
    add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=pppoe-out2 scope=30 target-scope=10

    ليست هناك تعليقات

    اعلان اعلى الموضوع

    اعلان اسفل الموضوع